Pages

19.4.11

Select the right sensor

We provide very competitive price of Telemecanique, Merlin Gerlin, Pepperl + Fuchs.

We will assist to select your required sensors,

Please provide your requirement:
Necessary
  • Type of sensor, eg, reflective, see-thru, C-slot, etc
  • Detection range, from as near as 1mm, to as far as 50metre.
  • Power supply such as DC, DC/AC, AS-Interface

Optional
  • Diameter of detection spot, from less than 1mm (such as needle) to as large as 2metre ( such as vehicle).
  • Light type can be Infrared, or Red Light.
  • Switching output has Transistor, Relay, AS-Interface, Light/Dark Switching.
If you are not sure, please provide your requirement, scenario, etc. so that we can assist in the selection.

Socomec Sircover COS

Socomec Sircover Manual Change Over Switches.
For switching between two sources, with ease and safety.

SIRCOVER products are manually operated multipolar changeover switches.
They ensure switching, transfer of source or transfer of two low voltage circuits on load as well as their safety disconnection.

SIRCOVER By-Pass are manually operated changeover switches. They are a combination of three interlocked switches enabling the use with 3+6pole or 4+8pole.
They insulate by providing simultaneous safety isolate top and bottom and by passing loads or low voltage circuits maintly during maintenance operations.

The following are the type and rated current, that we stock:
S-COS4-0125-CD Sircover C.O.S. 125Amp, 4pole
S-COS4-0160-CD Sircover C.O.S. 160Amp, 4pole
S-COS4-0250-CD Sircover C.O.S. 250Amp, 4pole
S-COS4-0400-CD Sircover C.O.S. 400Amp, 4pole
S-COS4-0630-CD Sircover C.O.S. 630Amp, 4pole
S-COS4-0800-CD Sircover C.O.S. 800Amp, 4pole
S-COS4-1250-CD Sircover C.O.S. 1250Amp, 4pole
S-COS4-1600-CD Sircover C.O.S. 1600Amp, 4pole

Place of Origin: France
Brand Name: Socomec
Model Number: Sircover

Min. Order Quantity: 1 Piece
FOB Price: SGD 250~8000 / Piece
Port: FOB SGD
Payment Terms: T/T, Western Union

all equiry are welcome.

ABB MCCB Tmax - Circuit Breakers

ABB MCCB switchgear, Tmax, low-voltage moulded-case circuit breakers.

We are stockist and export.

Place of Origin: ABB, Italy

We has stock on the following:
ABB MCCB 3pole 32amp, Icu 16/25kA
ABB MCCB 4pole 32amp, Icu 16/25kA
ABB MCCB 3pole 63amp, Icu 16/25kA
ABB MCCB 4pole 63amp, Icu 16/25kA
ABB MCCB 3pole 100amp, Icu 16/25kA
ABB MCCB 4pole 100amp, Icu 16/25kA
ABB MCCB 3pole 125amp, Icu 16/25kA
ABB MCCB 4pole 125amp, Icu 16/25kA
ABB MCCB 3pole 160amp, Icu 16/25kA
ABB MCCB 3pole 160amp, Icu 16/25kA
ABB MCCB 3pole 200amp, Icu 36kA
ABB MCCB 4pole 200amp, Icu 36kA
ABB MCCB 3pole 250amp, Icu 36kA
ABB MCCB 4pole 250amp, Icu 36kA
ABB MCCB 3pole 400amp, Icu 36kA
ABB MCCB 4pole 400amp, Icu 36kA
ABB MCCB 3pole 630amp, Icu 36kA
ABB MCCB 4pole 630amp, Icu 36kA
ABB MCCB 3pole 800amp, Icu 36kA
ABB MCCB 4pole 800amp, Icu 36kA
ABB MCCB 3pole 1250Amp, Icu 50kA
ABB MCCB 4pole 1250Amp, Icu 50kA


****

ABB MCCB has been used widely in the following environment:
- protection and control in installations for electric traction
- particularly severe environmental conditions such as mines and steelworks
- refineries and chemical plants as well as gas puipelines, water pipelines. . .
- installation on board ships
- protection and control of motors, generators. . .
- underground railway station
- off-shore drilling rigs
- offices, theatres, shopping malls and residential complexes

On top of that, Tmax s circuit-breakes and their accessories has compliance with the standards, such as with the IEC 60947-2, en 60947-2 (unified in 17 countries of cenelec) , cei en 60947 and IEC 61000 international standards and conform with the EC directive.


Min. Order Quantity: 1 Piece
Port: FOB SGD
Payment Terms: T/T, Western Union
Packaging Details: for Air Flight, or Ocean Sea
Delivery Time: Ex-stock, otherwise 4 - 6 weeks

Any enquiries are welcome.

EasyPact - Low Voltage Circuit Breaker


EasyPact Circuit Breaker is the most powerful breaker in its range, thanks to its unique design.
EasyPact

A World-Class Technology

EasyPact Circuit Breaker is the most powerful breaker in its range, thanks to its unique design.

Blow Open Contact Technique to reduce arcing time and increase performance

Enhanced Negative Gradient Blade Spring to guarantee the non-reclosing effect of the contacts during short-cirsuit.

Very limited and controlled exhaust gas (on interruptor side only) to reduce the safety perimeter and clearance to ground.

New concept of Isolated Arc Interruptor to assure high interrupting performance (30kA) and protect the mechanism/ trip unit/ electrical auxiliaries during short-circuit.

Use of High-Polymer Material to generate gas pressure and achieve optimal performance.

Double Spring Blade Suspension to control the contact pressure with a wiping effect between the two contacts.

Size: 60mm x 75mm x 130mm

Designed and certified to meet all requirements specified in IEC60439-1

Product Detail (for EZC100F3060):
Place of Origin France
Brand Name Merlin Gerin
Model Number EZC100F3060
Type Moulded Case
Poles Number 3
Currant Rating 60Ampere
Breaking Capacity 10kA
Frame Size 100 A frame
Icu for 220/240Vac 25kA
Icu for 380/415Vac 10kA
Icu for 440Vac 7.5kA
Icu for DC125V (1-pole) 5kA
Icu for DC250V (2-pole) 5kA
Ue 550V
Ui 690V

Min. Order Quantity 1 Piece/Pieces
Port CIP SG
Payment Terms T/T Western Union
Production Capacity 720 Piece/Pieces / Month
Packaging Details 24pieces per packing, 20kg.
30 packing's on pallet.
Delivery Time 120pieces Ex-stock, otherwise 4 - 8weeks